By Enrico Bonilauri
What’s the “time constant” of a building?
Among the many parameters than play a role in the thermal behavior of a building, whether or not it is built to be a Passive House, the time constant is one of the least known ones.
Nontheless, this parameter influences the way a building responses to changes in internal and external conditions, and therefore it is has a very important role in the correct operation of the building and its heating/cooling system.
Meet the Mechanical Ventilation System
With this article, we’d like to cover a topic that is very important for both comfort and energy efficiency of buildings: the ventilation of the house.
Unfortunately, this matter is as important as it is unknown to most people.
DesignPH: the SketchUp plug-in to design Passive Houses in 3D
We finally had the chance to test DesignPH, the SketchUp plug-in that allows you to carry out the preliminary design of passive buildings in 3D. Once the model is created, you can export the data to PHPP (the energy balance software for passive house design), to further the energy design in depth.
Even though this plug-in has been available on the market for a couple of years, since version 8.5 of PHPP, our recent meetings with passive house professionals tell us that this tool is not yet very widespread. It is the case of Italy, as well as the impression we got from our recent trip to the USA.
Discovering Colorado, the cradle of passive houses
A few weeks ago, for professional reasons we visited Denver, Boulder, Aspen and surrounding areas, in Colorado.
At the foot of the Rocky Mountains, in the hearth of the United States, this region saw some of the very first passive buildings being built in the world, thank to the Rocky Mountain Institute, founded in 1982 by Amory Lovins in Snowmass. We had a chance to visit this extrahordinaire building, which we described in its own article.
Thanks to the kindness of so many local colleagues and contractors we met, we also had the chance to visit several construction sites of low-energy buildings and passive houses. The overall experience was very interesting, allowing us to compare our European experience with a reality that is very different from it in terms of mobility, use and life span of buildings, use of energy and resources, and so on. In the eyes of a European, the USA remain a land of contrasts, with interesting lessons to be learnt.
One of the first “passive” construction sites we visited was located in Berthoud, thanks to Harrington Construction.

The interior of the passive house, before the packing of the cellulose insulation in the perimeter walls.
Construction techniques used in the US are evidently different from the ones we’ve used to far, for example in the two passive houses we are currently building in Cavriago. Nontheless, the construction quality remains high, to guarantee the level of comfort and energy efficiency of a passive house thermal envelope.
A second example of a passive building, in Boulder, was shown us by Mark Attard of AE Building Systems, a company specializing in products and components for low-energy buildings.
We also had the chance to visit some buildings with energy retrofit, as in the case of a house in Louisville, where the existing structure was insulated with rockwool (for the perimeter walls) and expanded perlite (for the slab on ground). Overall speaking, the peculiar climate of Colorado, which is very dry year round, allows to easily solve some retrofit problems that are particularly risky in our Italian climate, which is on the contrary very humid.
At the Alliance for Sustainable Colorado (which brings together several associations around the topic of environmental sustainability), we assisted to the presentation by Ashley Perl of the City of Aspen, about the effects of climate change on the city and its economy. The overall raise in temperatures is leading to a steady decrease in snow fall, and to the shortening of the skiing season. For climatic reasons, therefore, the city of Aspen is forced to re-think its entire economy.
The city of Aspen, with its 6.000 permanent residents, currently employs four people in several activities to diminish the environmental impact of the city. The “Canary Initiative” specifically includes a variety of initiatives to reduce consumption of energy and water, as well as to promote waste recycling. Given the small size of the city, its initiatives are generally used as pilot projects for the entire state of Colorado.
Among other meetings, we also had the chance to visit Alpen Widnows, the company producing some of the most performing windows currently available on the American market.

A window by Alpen Windows. The balloons are used to compensate the pressure difference between the glazing and the surrounding environment, caused by the high altitude.
Last but not least, we assisted to the presentation by Andrew Michler about his book “Hyperlocalization of Architecture”, which summarizes the state of the art of architecture in several countries around the world. The book also includes interviews with several eminent people such as Wolfgang Feist, founder of the Passivhaus Institut.
Overall, our trip to Colorado was very enjoyable, besides our professional meetings. We also managed to meet with old friends, have breakfast with donuts and dinners with elk burgers and craft beer. You can’t live on passive house alone.
Our visit to the Rocky Mountain Institut
During our recent trip to Colorado, we had the chance to visit the Rocky Mountain Institute in Snowmass, founded in 1982 by Amory Lovins as a research institute in matters such as sustainability, energy, and efficient use of resources.
The original headquarters of the Institute, that has now become Lovins’ residence, is one of the first passive buildings ever built in the world.
Our impressions from the 2015 Int’l Passivhaus Conference in Leipzig, Germany
A couple of weeks ago we went to Leipzig, Germany, to take part in the 19th International Passivhaus Conference, organized by the Passivhaus Institut in Darmstadt. With approximately one thousand people attending from all over the world, this event marks the gathering of some of the AEC sector’s greatest experts on energy efficiency. The following are our impressions from the event…
Energy Efficiency: the importance of site supervision
On our Facebook page, we are regularly publishing images from our Cavriago construction site, where we are building two Passive Houses. With this article, we would like to show just two examples of the many construction errors can occur during the scope of the works, proving that careful site supervision is necessary to meet a high level of quality and efficiency.
Our Passive House Italy group surpasses 2,500 members
In the past few days, our LinkedIn group dedicated to Passive House (Casa Passiva) in Italy has passed the milestone of 2,500 registered members, a sign of just how relative this subject is becoming for Italy.
A Disastrous Case Study: How Replacing Windows Alone Can Lead to Mold
In our previous articles, we have cautioned that an energy retrofit should be approached with an integrated, whole-building approach, and by a professional with experience in calculating and simulating thermal envelopes. The photos below show what happened to one family’s home when they decided to do an independent partial energy retrofit, without consulting a qualified professional. In this case, they decided to replace the old windows of their house with newer, high performance windows, hoping that they would be able to reduce their energy consumption.
BIM Energy Analysis with Archicad 17
As in its previous version, Archicad 17 comes with a built-in energy evaluation tool, that allows designers to develop the building energy concept from the preliminary design phase. The line that divides architectural design and energy simulation seems to be getting thinner and thinner. On one hand, this Graphisoft approach is no doubt cutting edge. However, some large doubts remain: